 
 
Specifications
 For other materials or modifications, please consult Emerson.
 OPERATING PARAMETERS
 Pressure rating per criteria of ANSI/ASME B31.3
 Nominal Inlet Service Pressure
 5076 psi / 35.0 MPa / 350 Bar
 Maximum Inlet Pressure
 6345 psi / 43.8 MPa / 438 Bar
 Minimum Inlet Pressure
 290 psi / 2.0 MPa / 20.0 Bar
 Operating at pressures below this minimum pressure could limit the maximum
 flow rate
 Design Proof Pressure
 150% of nominal inlet service pressure
 Leakage
 Bubble-tight
 Operating Temperature
 -40 °F TO +185 °F / -40 °C TO +85 °C
 Flow Capacity
 Cv = 0.17
 Decaying Inlet Characteristic
 0.05 psi / 3.4 mbar per 100 psi / 6.9 bar change in inlet pressure
 Filter
 10 µm
 The 10 µm filter is for initial system assembly protection. The product is
 designed to be used with particulate free hydrogen. Your system should
 be designed with proper filtration before the regulator to protect against
 contamination. 

  

Specifications

Pressure Range	5-100 psi (35-700 kPa), (0.35-7 bar)
Certifications	PED, CUTR, ATEX
Inlet Pressure Rating	1.7MPa(17bar)
outlet Pressure Rating	0.42MPa
Weight	1~3KG
Application	Gas& Oil industry

EMERSON TESCOM HV - 3500 Series Pressure Reducing Regulators

Special features

 
TESCOM HV-3500 Series Two Stage Pressure Reducing
 Regulator is a reliable, low maintenance pressure
 control solution. It is specially designed for use onboard
 industrial and commercial hydrogen fuel cell vehicles
 and allows manufacturers to maximize fuel efficiency
 and keep their fleet on the road for a longer distance.
 The HV-3500 also provides consistent pressure and
 continuous flow in a full range of operating conditions.
 It is suitable for nominal inlet pressures up to 35.0 MPa
 and flow rates above 3.2 g H2/s.
 Applications
 *
 
 Onboard industrial/commercial light and heavy-duty
 hydrogen fuel cell vehicles like buses and trucks
 Features and Benefits
 *
 
 Dual stage and active seal design that provides
 consistent pressure and continuous hydrogen fuel
 supply to fuel cells, decreasing downstream over
 pressurization risk
 *
 
 Superior shutoff performance
 *
 
 Corrosion resistant, nickel-plated aluminum body
 *
 
 One design suitable for the full range of vehicle
 operating conditions and various system pressure
 settings
 *
 
 Compact and lightweight configuration
 *
 
 Specially designed shape and standard mounting
 holes for ease of installation
 *
 
 Standard ports for sensor and pressure relief valve
 integrations
 *
 
 Local manufacturing and support
 

Packing & Delivery

Our Service

1.Swift delivery
 For common parts, we can deliver the goods within 3 days
 
 2.Original products
 All the products we sell are from origin manufacturer. We will submit all the manufacturer documentation while we finish delivery.
 
 3.Quality Assurance
 
 4.Technical Support
 Including inspection,repair and maintenance, we can give all kinds of technical support.
 
 5.Quickly responce
 Our staffs will keep 24h online and answer your question very quickly.

Our Company

Xiangjing(Shanghai)Mechanical and Electrical Tech. Co., Ltd.

Xiangjing(Shanghai)Mechanical and Electrical Tech. Co., Ltd. is mainly engaged in the technical development, technical consultation, technical service, installation and commissioning services of marine engineering, oil and gas, petrochemical, water conservancy and hydropower, thermal power generation and other mechanical and electrical equipment products; Well-known brand fluid control valves; instrumentation; hydraulic pipe fittings; bearings; seals; industrial automation and other high-tech enterprises.